Answers

Tear the rows out that you would like to remove and then replace with new material. You may have to shave the tongue off from some pieces to fit back in and then caulk in with Energy seal.

Use a treated log or make sure that the foundation is high enough to prevent back splash from hitting that first, or any log. Be sure to apply a good borate treatment before staining to all wood surfaces.

You can do all of the above. You want to make sure that all rotten logs are changed out before covering or they will continue to rot and cause structural issues later. Contact a local builder for consultation and knowledge of building codes in your area.

Most log homes eventually need to be caulked or chinked even though the manufactures say they don’t. It sounds like they waited to long before taking care if it. Once caulk / chink is applied PROPERLY, it only needs inspection spring and fall for cracks or breaks. It will last… Read More »Archive-2378

You could do it, but be aware that you are going from little or no maintenance to maintenance at least every 3 years. Stay away from the oil. Get a good quality latex log home stain. You should get a local contractor for advice on what the best way to… Read More »Archive-2380

First, you should address the rot and not just cover it or it could become a structural issue. You should attach furring strips with expansion slots for the logs to move and not disturb the new siding. Call Ryan at 877-788-5647 in regard to the rot.

call Ryan at 877-788-5647.

I personally do not think you need to stain the backs of the siding. Others will disagree. Wasted cost in my opinion. Once the log siding is up it should be allowed to dry properly and then given a light bath with Log Wash. Then apply a borate treatment. Allow… Read More »Archive-2386

Not sure where you are located, but unless you are in the deep south I would recommend waiting.

No, it should still work for you. You may want to find a couple of past customers from your supplier to see how it has worked for them.