Answers

Call Ryan at 877-788-5647

Fill them with Energy Seal and then inspect them regularly for failure then make sure they are sealed properly.

I would take a grinder with 36 grit to those log ends and tighten the grain up so they can’t soak water up so easily. Then fill the holes with Grip Strip and chink. You could also us Wood Epox, but it can get costly if you have a lot… Read More »Archive-8466

Contact Mike at 866-670-3020 for help and some estimates.

Never use bleach on wood. Your stain can fail prematurely because of a lack of a good bond to the wood fiber due to the bleach. The logs were not allowed to dry log enough before staining, at least a couple of days if they were not power washed. If… Read More »Archive-8470

Call Mike at 866-670-3020.

go to this link and look for one near you. http://permachink.com/workshops.htm

Call Ryan at 877-788-5647 or ryan@logrepair.com for help.

Sounds like it needs to be completely caulked or chinked on the exterior. If the gaps are 3/4” or less, Energy Sela Caulk should be used, if larger, Perma Chink should be used.

Call Ryan at 877-788-5647