If you are talking about the splits (checks) in the logs, they should not be filled. If you are talking about the chink lines between each coarse of log then you will want to use Energy Seal if the gap is 3/4” or less, and chink if it is larger.… Read More »Archive-1058
Sand or corn cob blasting
Just the bee hole should have a cotton ball stuffed into it and then caulk closed with Energy Seal. If there is a larger area damaged from the woodpeckers then you will need to fill with Wood Epox, sand down and stain to match. Very large areas of damage will… Read More »Archive-1062
Cut down the logs as deep as you need with a chainsaw every inch or so then chisel area out flat. You may want to make a mark with a permanent marker on your chainsaw blade for a depth guide. You may want to consider installing fur stripping and hang… Read More »Archive-1064
It is recommended that a ”closed cell” foam be used. There tends to be a lot of discrepancy on whether open cell or closed cell off gases. My experience is that you should not use the blue, pink or bead board insulation behind latex chink. I have seen some terrible… Read More »Archive-1066
If it is flaky it will need to be Osborne brushed and then stained to blend in bare spots. you may have to put a LIGHT coat of stain on other 2 sides to blend look.
You could do it now, but there will be some pulls and breaks that will need to be repaired.
I would say go with the chamfer and run Energy Seal caulk in each chink line inside and out. Also at butt joints where two log ends meet in the middle of the wall.
You could fill with Grip Strip and chinking. Call 800-564-2987 to purchase or cover them with batons.
Call Dave at Timeless Wood Care Products 800-564-2987. He will be able to help you and answer your questions.