Answers

I see it all of the time. Will send you a picture.

You can try sanding them, but more than likely it would be easier to replace the boards and start over.

As long as the char isn’t too deep you should be able to blast them clean. We normally use corn cob for burn clean up. Can’t say where to rent a blaster. Start calling local rental stores or call Perma Chink and see if they would rent you one. I… Read More »Archive-6346

Even though cedar is rot resistant it would hurt to apply borate before staining. Spraying on prior to staining would be acceptable and probably less costly, just be sure to allow to dry and do not over apply as it can cause peeling. Also do not get it on the… Read More »Archive-6348

If you are referring to borate there is no way that I know of.

Log wash yes, bleach NO! You could apply a borate solution like Shell Guard and then let it go the winter. In the spring give it a light wash with Log Wash, allow to dry and then stain.

DO NOT use paint. If you want the painted look, but the qualities of stain use a solid latex stain. I prefer Sherwin Williams Woodscapes Solid.

It will need a LIGHT wash with Log Wash per the label and then apply the same kind of stain. Call 800-564-2987 to purchase.

Replace the log. Call Ryan at 877-788-5647 for help

Maybe open some windows and let fresh air in. Not sure why it is happening.